Esteem Series

Steel-Craft’s Esteem Series of aluminum garage doors merges quality with modern design. Beloved by architects and designers looking to give homes a unique touch, our Esteem doors are highly customizable.

Esteem doors are available in a wide variety of colours. Feel free to create waves, radiate a warm glow, or simply let the sun shine in. Distinction is easy to achieve with this beautiful, modern garage door.

We seal our aluminum panels to increase energy efficiency, and our transparent panels are sealed to the frame with a glazing compound for air-tightness. Our unnecessary warranty covers Esteem Series doors.

Features

WEATHERSTRIPPING

Bottom weatherstripping: U-type arctic grade vinyl Section interface: arctic grade vinyl bubble-shaped weatherstrip at all section meeting rails Jamb: anodized or painted aluminum with two-point flexible arctic grade vinyl weatherstrip Header: anodized or painted aluminum with two-point flexible arctic grade vinyl weatherstrip

HYDR-O-GUARD

Re-designed to keep the weather out. Note: SA7500 Aluminum rails will be used on all Esteem door styles going forward.

DOOR FACE HARDWARE

Graduated end hinges and centre hinges made from galvanized steel Heavy duty rollers with heat-treated and outer races with 10 floating ball bearings.

STRUTTING

Doors over 11'0" in width shall be reinforced with 16Ga galvanized steel "Z" brace per section. Strutting is required for doors wider than 3,353 mm.

FRAMES

Thickness: 1.8mm/0.071”; 3mm/0.118” at fastener locations Standard Top/Bottom/End Stiles: 162mm/6.375” Intermediate Stiles: 76mm/3”

FINISH

Standard: #17 clear anodized Class II and is in accordance with AA-M12C22A31 (Aluminum Association) specifications. Painted product (special order) powder coated to AAMA 2603 standards.

TEMPERED GLASS, POLYCARBONATE OR INSULATED ALUMINUM PANEL

All glazing materials sealed to door frame with butyl tape and held securely with rigid PVC snap-in mouldings.

COUNTERBALANCE SYSTEM

Class II oil tempered ASTM A229 wire, minimum 10,000 cycle torsion springs on continuous steel shaft Galvanized steel lift cables with a minimum safety factor of 7 to 1

TRACKS

50 mm or 75 mm wide galvanized steel tracks